Clearaudio Satisfy Kardan
Clearaudio gimbal tonearm with magnetic anti-skating and Direct Wire Plus cable connecting the cartridge directly to the phono preamplifier.
Description
The Satisfy Kardan is a turntable tonearm from Clearaudio, built on a gimbal pivot principle. It is intended for replacing or equipping a turntable that accepts the Clearaudio mount, designed to carry a cartridge under the best possible mechanical conditions.
Its technical distinction lies in magnetic anti-skating control, which compensates for the centripetal force exerted on the cartridge without resorting to a spring or suspended thread system, a potential source of friction. Tracking weight is adjusted via a micrometric vernier, allowing precise adjustment for cartridges ranging in mass from 2.5 g to 17 g. The connecting cable, a Clearaudio Direct Wire Plus measuring 1.1 m and terminated with RCA MPC plugs, connects the cartridge directly to the phono preamplifier without an intermediate connector at the arm, limiting the signal's points of failure.
The arm's geometry is defined by a distance of 222 mm between the pivot and the platter spindle, for a total length of 302 mm. Mounting relies on a Clearaudio bore hole of 24.85 mm diameter, which requires a turntable compatible with this mount.
This arm is aimed at vinyl enthusiasts who already own a Clearaudio turntable, or one ready to accept this type of mount, and who wish to pair it with a cartridge of their choice thanks to the wide tracking weight adjustment range. The direct wiring will be of particular interest to those seeking the shortest possible signal path between the cartridge and the phono preamplifier.
Technical specifications
| Construction principle | Gimbal tonearm, magnetic anti-skating control |
| Compatible cartridge weight | 2.5 g to 17 g |
| Weight adjustment | Micrometric vernier |
| Connecting cable | Clearaudio Direct Wire Plus (1.1 m), RCA MPC plugs |
| Distance from arm pivot to platter spindle | 222 mm |
| Total length | 302 mm |
| Mounting hole | Clearaudio, bore diameter 24.85 mm |
| Weight (Black Aluminium) | 350 grams |
| Weight (Silver Aluminium) | 350 grams |
| Weight (Carbon) | 345 grams |
What to check before buying used
The gimbal pivot deserves checking for play and freedom of movement, as any deviation results in groove wear and a degraded stereo image. The micrometric vernier used to adjust tracking weight should turn without stiff spots or excessive play, and the magnetic anti-skating system must retain its full compensating force. Finally, the Clearaudio Direct Wire Plus cable and its RCA MPC plugs should be examined to rule out any loose contact or crackling, as this direct connection tolerates no faulty connection.
Looking for this reference: Satisfy Kardan ?
Tell us what you are looking for: our merchants are notified, and one of them may have it in stock.