Elipson Architect IC6

In-wall speakers

Ceiling-recessed speaker, 2-way coaxial with pivoting tweeter, designed for discreet surround sound in home cinema or ambient sound systems.

On request 99,00 €
Guaranteed & tested Equipment checked by the merchant
Returns accepted 14 days to change your mind

Description

The Architect IC6 is a round in-ceiling speaker, designed by Elipson to blend discreetly into a room. It belongs to the Architect In series and combines a woofer and a tweeter on the same axis, a coaxial configuration aimed at consistent sound diffusion regardless of where one stands in the room.

The woofer uses a 165 mm paper cone with a rubber surround, while the 25 mm silk dome tweeter can be angled from 35 to 40° in any direction to adjust sound dispersion towards the listening area. The crossover frequency is set at 2950 Hz, dividing the work between the two drivers. With a frequency response of 70 Hz to 20 kHz (±3 dB), a sensitivity of 87 dB / 1W / 1m and an impedance of 8 Ohms, it accepts an amplifier with a recommended power of 100 W.

This type of speaker is aimed at those wishing to install a home cinema system or ambient sound diffusion without speakers visible on the floor or on stands. Its coaxial design and pivoting tweeter make it a relevant choice for the surround channels of an immersive setup, where the speaker must remain discreet while properly covering the listening area.

Technical specifications

Recommended amplifier 100 W
Frequency response 70 Hz - 20 kHz (±3 dB)
Crossover frequency 2950 Hz
Sensitivity 87 dB / 1W / 1m
Impedance 8 Ohms
Tweeter 25 mm silk dome, angling from 35 to 40° in any direction
Woofer 165 mm paper cone, rubber surround
Dimensions (Ø × D) Ø230 x 102 mm
Cutout size Ø200 mm
Weight 1.45 kg

What to check before buying used

The silk dome tweeter pivots the stated 35 to 40°: check that the mechanism still turns freely and is not blocked by dust or a previous impact. On the woofer's paper cone, inspect the rubber surround for cracks, hardening or detachment, signs of ageing that affect bass reproduction. Also check the Ø200 mm cutout grille and the mounting frame, which are often marked during removal.

Currently unavailable

Looking for this reference: Architect IC6 ?

Tell us what you are looking for: our merchants are notified, and one of them may have it in stock.