GoldenEar Triton One R

Active floorstanding speakers

Semi-active 3-way floorstanding speaker from GoldenEar, combining an HVFR ribbon tweeter with an active amplified 1,600 W bass section for wide-bandwidth listening.

Temporarily unavailable
Guaranteed & tested Equipment checked by the merchant
Returns accepted 14 days to change your mind

Description

The GoldenEar Triton One R is a semi-active 3-way floorstanding speaker that pairs a passive section for the treble and midrange with an integrated active subwoofer section. It thus combines a tweeter, two midrange drivers, and a set of woofers driven by an onboard amplifier, all within a single floorstanding cabinet.

The HVFR (High-Velocity Folded Ribbon, 27 × 33 mm) tweeter is a folded ribbon designed to deliver treble with an extended response up to 35 kHz. The two 13.3 cm midrange drivers handle the midrange frequencies alongside this tweeter. Bass is handled by three active 5-in × 9-in woofers, powered by a built-in 1,600 W Class D amplifier, supported by four 17.8 × 25.4 cm planar passive radiators that boost output at the low end of the spectrum without placing any additional demand on an external amplifier. The stated frequency response spans 13 Hz to 35 kHz, with a sensitivity of 92 dB/W/m and 8 Ω compatibility for the passive section.

This type of configuration suits a hi-fi or home cinema system where wide-bandwidth reproduction is sought without adding extra subwoofers or a dedicated external power amplifier for the bass. The balanced XLR input for the active subwoofer section makes integration straightforward within a system fitted with balanced outputs, typical of carefully assembled setups.

Technical specifications

Type Semi-active 3-way floorstanding speaker
Tweeter HVFR (High-Velocity Folded Ribbon), 27 × 33 mm
Midrange 2 × 13.3 cm (5.25 in)
Active woofers 3 × 5 in × 9 in, built-in 1,600 W Class D amplifier
Passive radiators 4 × 17.8 × 25.4 cm (7 in × 10 in)
Sensitivity 92 dB/W/m
Impedance 8 Ω compatible
Frequency response 13 Hz – 35 kHz
Connectivity Balanced XLR (active bass input)

What to check before buying used

The planar passive radiators and their suspension warrant a careful visual inspection, as sagging or tearing affects bass reproduction. The Class D amplifier built into the active woofers should be tested during extended operation to rule out any risk of overheating or thermal shutdown. It is also advisable to check the condition of the HVFR tweeter's folded ribbon, which is fragile and susceptible to impact damage, as well as the proper functioning of the active module's balanced XLR input.

Currently unavailable

Looking for this reference: Triton one R ?

Tell us what you are looking for: our merchants are notified, and one of them may have it in stock.